Click on the image to check the artwork
By certification 
XG3-CT Rotary DOT PEEN MARKER ( Standard )
Description:
The DOT PEEN MARKER also known as Dot Marking,engraving, micropercussion and indent marking , that is carbide stylus pin dotting on the surface with high frequency than made a mark , it could mark characters, digital (date , VIN codes , series NO ), logo or Datamatrix barcode information on metal and hard plastic material --for part identification requirements. such as aerospace, automobile, mechanical, cast, electromechanical.
Parameters
No PC required
0.3-0.8mpa Compressed air is required
Machine could marking on flat and rotary surface .
Machine support barcode output at the sametime when do the marking .
Marking software supply more than 100 types fonts
Marking software support text or logo size change as will , mini 1*1mm
Software could control marking speed as will
Mark straight line text, arc text , circles, boxes , ellippses ,lines and arcs , import logos as PLT files
Machine could marking on wide range of materials from soft plastics to hardened steel- up to Rc60
Marking speed |
2-3 digital/s (5*7mm) |
Inputting air pressure |
0.3-0.6MPA |
Marking deepth |
0.1-0.3mm |
Power consumption |
≤350W |
Marking area |
Flat :110*80mm 200*150mm(option)/ rotary : 360degreen,1-8kg |
Voltage |
AC220V/50Hz 110V/50~60HZ |
Marking accuracy |
0.02mm |
WorkingTemperature |
0℃-40℃ |
Marking software |
XG3000 |
Packing information |
85kg/0.17 CUB |
http://www.xgmarks.com/
